What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 20.06.2025 05:38
It also is a device that limits the change in current flow.
[old diagram got deleted by accident]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
These are simplified answers to the original question, and does not change anything I wrote above.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Why should we share our wife with others?
The MOV will conduct when the voltage exceeds 50% of line voltage.
These devices are installed between the “hot” and “neutral” and protective ground.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But it can get overloaded, and no longer works.
Would the word literate carry the same meaning with public (common wealth) in 1900 vs today 2020?
Edit 2024–10.
(Dc diagram shown, AC is similar).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
A circuit breaker is similar, but is resettable.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
At least they know the answer if they wanted it.
An AC voltage/ current source, and an ac inductive load.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
United Airlines Flight Attendants Lose Legal Battle Over ‘Reprehensible’ Sickness Policy - PYOK
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
I post the exact comment here.
So, the voltage could go up to 500 volts, and the fuse will not open up.
But… the neutral is now “floating” because of the 1 ohm resistance.
For this case there are devices called Metal oxide varistors (MOV).
This is 'the assistant's answer'
2024–10–14 [Omar Gharbi Omar Gharbi ]
Here is a simplified AC power diagram.
There are two important concepts here.
I'm straight, so why do I love watching guys cum?
What does a fuse do?
2024–10–16 [ OO OLAOYE OYEBODE ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
'Housewives' Exec Assistant and Mom of 2 Dies 'Moments After Giving Birth' to Son - TODAY.com
At one ohm, the resistor has a maximum of 1 watt power.
One is “what exactly is in a ‘surge protector’ ? ”
This device then solves the entire problem.
Why do you think Filipinos are conservatives?
so, what happens?
This is where this question deviates from being a 'generic' question, and becomes more specific.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
A fuse is a non-resetable over current circuit protector.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
First Sentence:
Upvotes:
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
nine
He then asserts :
This is where the MOV conducts again, and dissipated the energy.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
eight
It seems Mohan does not understand the difference between a comment and an Answer.
[image of Common-mode choke]
He then describes the function of a fuse.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The bolt then partially travels down the line to your home.
This one hit behind the barn.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
One
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
What is lightning?
the problem then depends on "how fast does the fuse operate?".
but I think this circuit , shows a few more pieces.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
but this device (an Inductor) … impedes the rapid changes in the current.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Because the load is inductive, the current lags the voltage.(by a bit).
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The third is lightning and “how it gets conducted into a home.”
Now when you have a certain ac resistance, then a current flows in a loop.
Barnstars:
The other is “what does a “fuse” do?”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
In schematic diagrams this is the symbol for a fuse:
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–10[John johnson John Johnson ]
He then describes Rainy Season and Lightning.
There are three different concepts here that are getting confused.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
a photo is worth a thousand words.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
what exactly is a ‘surge’ protector?